Classroom learning support facilities user manual

HKCT Jockey Club Undergraduate Campus include different type of classroom, this user manual is suitable for :

MUC102, MUC103, MUC104, MUC105

MUC202, MUC203, MUC204, MUC205

MUC503, MUC504

Different classrooms include different type of facilities which are indicate by the capacity .Normally we can find these type of facilities in the classroom：

1. Tutor 's Computer 

2. Projecter

3. Acoustic system

4. Projecting screen

Quick Pickup manual

(A)Using the tutor 's computer and project it Turn on the computer Find the control panel which is show by the following photo ,and press the button which is highlight with a red arrow. When it is finish, press the same button and then turn off the computer. Done.

(B)Using the microphone Find the microphone charger and get the microphone. The red box in the following photo shows the switch of the microphone. Push up to turn it on. Please turn off the microphone and put it back into the charger when finished.

Detailed user manual

(A) Tutor 's computer

There is tutor 's computer in the classroom. And they are already connected to the projector and the acoustic system.

• Using the tutor 's computer

1. Press on the power and turn the computer on
2. Check if there is any signal to the monitor.
3. Turn on the projector and project the PC.

• Bring your own personal computer and use.

1. Please refer to How to project own personal computer or visualizer

(B) Projector

AMX A&V equipment automatic control system is installed in this classroom.

Aims to provide a more easy way to control the AV equipment and help tutor to focus on teaching.

The following photo shows the control panel, the control panel is located on the tutor 's desk.

Control Guidelines:

1. Projector ON/ OFF
2. Lights (in front of the whiteboard) ON/ OFF
3. Project the PC.
4. Project the We Present.
5. Project the reserved VGA/HDMI source
6. Blank (Stop projecting)
7. Projector screen scroll up
8. Projector screen scroll down
9. Volume Control of PC

*You may check the detailed manual if needed.

Using own personal computer or visualizer:

U may need to connect your device to this panel.

*Please contact IT department by email if you need to borrow notebook/visualizer/VGA cable/HDMI cable/3.5 mm audio cable. 

Email address: helpdesk@it.hkct.edu.hk

Procedure of projecting HDMI source:(Please refer to the picture of AMX control panel)

Press button 1. Turn on the projector

Press button 2. Turn off the light which is in front of the whiteboard

Press(Once)button 5.Project the HDMI sorce.

When you have finished the lesson,

Press button 1. Turn off the projector.

Turn off the computer. Done.

Procedure of projecting VGA source:(Please refer to the picture of AMX control panel)

Press button 1. Turn on the projector

Press button 2. Turn off the light which is in front of the whiteboard

Press(twice)button 5. Project the VGA source.You may find that the button turn it's color to yellow.

When you have finished the lesson,

Press button 1. Turn off the projector.

Turn off the computer. Done.

(C)Acoustic system

• There are two handhold wireless microphone inside the classroom.(left photo)，and a Gooseneck Microphone(right photo).
• The switch of the handhold microphone is at the middle.Upward means On and downward means Off.
• The switch of the Gooseneck Microphone is at the bottom. Shows a push button. Press it to turn on and turn off.

• The following photo shows the microphone receiver in the classroom.

Control Guidelines:

1. ON /OFF (Blue light means ON)
2. CH A microphone volume control
3. CH B microphone volume control

 (D) Projector screen

The projector screen is already connected to the AMX A&V equipment automatic control system,please using the AMX controller to control the projector screen.